Key points are not available for this paper at this time.
The moving bed heat exchanger (MBHE) has been widely applied in the recovery of waste heat of industrial particles. Currently, investigations focus on uniform-size particles in the MBHE, but few studies are conducted on multi-size particles produced by industrial granulation. Therefore, based on the discrete element method (DEM), the heat transmission model of multi-size particles is established, and flow and heat transmission processes of typically normal distribution particles in the MBHE are studied. In conclusion, there are significant differences in particles tangential velocity and contact number in local regions of a heat exchanger pipe, resulting in different local heat transmission coefficients. In addition, the increases in outlet particle velocity and inlet particle temperature significantly enhance the heat transmission. When the outlet particle velocity grows from 1 mm/s to 5 mm/s, the overall heat transmission coefficient increases by 36.4%, and as the inlet particle temperature rises from 473 K to 873 K, the overall heat transmission coefficient increases by 16.1%.
Cao et al. (Sun,) studied this question.