Targeted coverage of crushed grass segments under the fruit tree canopy synergistically achieves the agronomic goals of soil moisture conservation, weed suppression, and soil fertility improvement. To address issues like incomplete grass cutting and high risk of damaging fruit trees in complex orchard environments with traditional mowing devices, a lateral grass discharge blade for orchard mowers was designed. Based on airflow field theory, the dynamic basis of the airflow field, critical conditions for carrying crushed grass segments, and their movement laws on the blade and in the air were analyzed to identify key factors affecting discharge. CFD simulations were conducted using the Flow Simulation module of SolidWorks 2021 to explore the effects of the blade airfoil’s long side, short side lengths, and horizontal included angle on the outlet velocity and outlet volumetric flow rate of crushed grass segments, determining the reasonable parameter range. With these three as test factors and the two indicators above, orthogonal tests and parameter optimization were performed via Design-Expert 13.0 software, yielding optimal parameters: long side 125 mm, short side 35 mm, horizontal included angle 60°, corresponding to 9.105 m/s outlet velocity and 0.045 m3/s volume flow rate. A prototype mowing device with these parameters was fabricated for orchard field tests. Results show an average stubble stability coefficient of 94.2%, average over-stubble loss rate of 0.39%, and crushed grass segment distribution variation coefficient of 23.8%, meeting orchard mower operation requirements and providing technical support for orchard weed mowing, coverage, and utilization.
Guo et al. (Fri,) studied this question.