This study evaluates the performance and scalability of fluoride-salt-lubricated hydrodynamic journal bearings used in primary pumps for Fluoride-salt-cooled High-temperature Reactors (FHRs). Because full-scale pump prototypes have not been tested, a scaling analysis is used to relate laboratory results to commercial conditions. Bearings with different length-to-diameter (L/D) ratios were assessed over a range of shaft speeds to quantify geometric and hydrodynamic effects. High-temperature bushing test data in FLiBe at 650 °C were used as inputs to three-dimensional computational fluid dynamics (CFD) simulations in STAR-CCM+. Applied load, friction force, and power loss were computed across operating speeds. Applied load increases linearly with shaft speed due to hydrodynamic pressure buildup, while power loss increases approximately quadratically, indicating greater energy dissipation at higher speeds. The resulting correlations clarify scaling effects beyond small-scale testing and provide a basis for bearing design optimization, prototype development, and the deployment of FHR technology. This work benchmarks speed-scaling relations for fluoride-salt-lubricated hydrodynamic journal bearings within the investigated regime.
Liu et al. (Thu,) studied this question.