Polyimide aerogels (PIAs) possess enormous application potential in high-temperature thermal insulation scenarios. As high-efficiency thermal insulation materials, their thermal safety and thermal insulation performance are of crucial importance. Currently, poor dimensional stability, high-temperature pyrolysis, and severe shrinkage remain the key factors restricting their development and practical application. In this work, we employ an in situ co-gelation synthesis strategy, where methyltrimethoxysilane (MTMS) is introduced as the silica precursor to fabricate SiO2/polyimide aerogels (Si@PIAs). This strategy enhances the interfacial bonding strength between the organic and inorganic phases, enabling their complementation of strengths. Experimental results demonstrate that the incorporation of the inorganic SiO2 phase endows Si@PIAs with higher thermal safety, superior thermal insulation performance, lower density, and reduced shrinkage. Among them, Si10@PIA performs best with a density of 85 mg/cm3, a thermal conductivity of 23.28 mW/(m·K), and a heat flow peak temperature of 720.7 °C. More importantly, pyrolysis analysis reveals that the pyrolysis process of Si@PIAs shifts to a randomized nucleation and growth model (n = 2/5) with the mechanism function g(α) = −ln(1 − α)5/2. Compared with pure PIAs, Si@PIAs possess stronger resistance to pyrolysis, lower gross calorific value, and improved thermal safety. This study provides theoretical and practical guidance for the development of high-performance aerogel materials, promoting their application in lithium-ion battery separators, high-temperature insulation, and fire-resistant materials.
Li et al. (Thu,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: