The COVID-19 pandemic critically emphasized the need for rapid, flexible, and decentralized manufacturing solutions to support the urgent demand for essential medical equipment, such as oximeters. Metal wire directed energy deposition—w-DED, also known as w-LMD (wire laser metal deposition)—combines the benefits of high material utilization, increased printing speed, and reduced waste, making it an attractive alternative to traditional powder-based processes, especially under time-sensitive and resource-constrained conditions. This work presents a case study focusing on the design and fabrication of injection molds for oximeter casings using metal-wire-based DED. Martensitic stainless steel AISI-420 wire was employed as feedstock and processed via laser wire additive manufacturing to produce a robust, near-net-shape mold suitable for plastic injection molding. The material was selected due to good corrosion and wear resistance. However, poor ductility and toughness, together with AM-induced anisotropy, were the main challenges to address. Therefore, a multi-step methodology was defined to study the effect of different process parameters, which was validated through printing trials, and the optimum process parameter set was identified. The process enabled the rapid construction of intricate mold geometries, minimizing lead times and allowing for quick design iterations. Microstructural and physical properties such as microhardness of the as-built molds were thoroughly characterized. This case study not only illustrates the technical feasibility of producing functional injection molds via metal w-DED but also outlines its role as a resilient manufacturing pathway, capable of meeting emergent healthcare needs and supporting broader industrial applications in a post-pandemic context.
Gargalis et al. (Thu,) studied this question.