ABSTRACT With rapid advances in nanotechnology and materials science, the development of high‐performance humidity sensors has become a research hotspot. In this work, the porous carbon nanofibers (PCNFs) with controllable nanopore structure were prepared from polyacrylonitrile (PAN)/poly(vinylidene fluoride) (PVDF) blended polymers by electrospinning technique and carbonization method. The low‐cost and easily available PCNFs were introduced into the polyvinyl alcohol (PVA) humidity‐sensitive system, and the PVA/PCNFs composite nanofibrous humidity‐sensitive layer was fabricated on the surface of quartz crystal microbalance (QCM) sensors. The PVA/PCNFs composite nanofiber‐modified QCM moisture‐sensitive element had good moisture‐sensitive response characteristics with a maximum frequency response of −3114 Hz (11%–98% RH), a fitted correlation coefficient of R 2 = 0.9981, and response/recovery times of 36 s/< 1 s and 60 s/< 1 s under low and high humidity conditions, respectively. In addition, the QCM sensor based on PVA/PCNFs nanofibers showed good reproducibility and long‐term stability. Compared with other moisture‐sensitive elements, the PVA/PCNFs moisture‐sensitive element has the characteristics of fast response and easy fabrication, which provides a solution for the preparation of low‐cost, high‐performance and environmentally friendly moisture‐sensitive elements.
Zhou et al. (Fri,) studied this question.