Basalt Fiber Reinforced Polymer (BFRP) bolts offer a high mechanical performance, yet their non-destructive evaluation in anchorage systems remains scarcely investigated. This work examines guided wave propagation in BFRP bolt anchorage structures through a combined experimental and numerical analysis. Optimal excitation within 35–100 kHz was determined experimentally, revealing 40 kHz as the most stable mode, with a pronounced bottom reflection and a peak-to-peak amplitude of 0.31 V. Numerical simulations explored the influence of anchorage medium properties, bolt characteristics, and de-bonding defect locations and lengths on dispersion, attenuation, velocity, radial energy distribution, and echo response. The results indicate that denser anchorage media reduce velocity and attenuation but enhance radial nonuniformity, whereas a higher elastic modulus decreases amplitude and increases attenuation; a larger Poisson’s ratio elevates both velocity and attenuation. For the bolt, a higher density lowers velocity and attenuation, while a greater modulus amplifies both; Poisson’s ratio exerts a minor positive effect. Defect echo time varies linearly with defect position, and increasing the defect length elevates velocity yet diminishes amplitude. These findings elucidate the interplay between material parameters, defect geometry, and guided wave behavior, offering a basis for the optimized non-destructive testing (NDT) of BFRP bolts and facilitating their deployment in engineering applications.
Li et al. (Tue,) studied this question.