Urea electrolysis has emerged as a promising alternative to conventional water electrolysis for hydrogen production, owing to low electrical energy consumption as well as organic wastewater. However, the practical implementation of this approach is primarily constrained by the lack of cost-effective and efficient electrocatalysts. Thus, the development of earth-abundant, non-precious metal-based bifunctional electrocatalysts toward both the hydrogen evolution reaction (HER) and the urea oxidation reaction (UOR) is of critical importance. In this context, nanostructured, reduced nickel-cobalt tungstate supported on Ni foam is fabricated as a binder-free, freestanding electrode via a two-step hydrothermal process followed by partial thermal reduction. By systematically tuning the precursor concentrations of Ni, Co, and W, the morphology and electronic structure of the material are effectively modulated. The introduction of oxygen vacancies through partial thermal reduction plays a key role in enhancing charge transport properties. The optimized NiCo@W0.5/NF electrode exhibits a porous, flower-like architecture and demonstrates excellent bifunctional electrocatalytic activity toward both UOR and HER, accompanied by improved mass transport behavior. When employed as both the anode and cathode for overall urea electrolysis, NiCo@W0.5/NF requires a low cell voltage of only 1.68 V to achieve a current density of 100 mA cm−2 and delivers impressive operational stability in an optimized electrolyte composed of 3 M KOH and 0.33 M urea. These results indicate that NiCo@W0.5/NF is a highly promising and efficient bifunctional electrode material for urea assisted hydrogen production.
Kakati et al. (Fri,) studied this question.