This article presents the design and detailed characterization of a new supersonic wind tunnel at the Aerospace Laboratory for Lasers, ElectroMagnetics, and Optics of Texas A&M University, tailored for optical diagnostic development and sub-scale fundamental compressible fluid dynamics research. A Ludwieg tube tunnel architecture was selected due to its robustness, versatility, and low operational costs. The tunnel consists of a 50-foot-long driver tube constructed from modular Tri-Clamp spools, a Mach 4 nozzle with 3 in. exit diameter configured as a free jet, and a fast-acting valve with 14 ms opening time for high-duty-cycle operation. Such construction proved to be a robust, compact, and affordable solution for academic applications. Characterization methods consisted of simultaneous high-speed dot-schlieren, total and static pressure measurements, and femtosecond laser electronic excitation tagging. Average flow velocity for the first steady-state test time was measured via FLEET at (668.0 ± 5.7) m/s. The Mach number was calculated based on the angles of the attached oblique shocks formed near the 30° cone model. Calculated Mach number was repeatable from run to run and had small oscillations near the average value of 3.96 ± 0.03. Based on the simultaneously measured velocity and Mach number, the static temperature was calculated to be between (68.6 ± 0.3) K and (66.3 ± 0.3) K throughout the 400 ms test time, completely defining the thermodynamic state of the generated freestream flow.
Leonov et al. (Sun,) studied this question.