This study investigates the hydrophobic properties of hexamethyldisiloxane (HMDSO)-based coatings deposited by atmospheric pressure plasma-enhanced chemical vapor deposition (AP-PECVD). The objective of this procedure is to enable the extraction of molded components from the mold cavity. The test specimen geometry employed in the present investigation were made of tool steel 1.2311, a material that is frequently utilized in industrial applications. A series of experiments was conducted to assess the coating performance. Initially, surface energy measurements based on contact angle analysis were performed to determine the polar and dispersive surface components. Finally, energy-dispersive X-ray spectroscopy (EDX) and scanning electron microscope (SEM) images are used to perform an exact measurement of the elemental composition and an optical comparison of the surface. The results of the work indicate that the material composition on the surface of silicon and oxygen is of particular importance. In addition, the results indicate that the use of argon as a carrier gas has a positive effect on reducing surface energy and increasing the contact angle to water drops.
Moritzer et al. (Wed,) studied this question.