• Gradient Boosting with RSM-NSGA-III achieved accurate multi-output engine predictions, with R² more than 0.95 on 7 out of 8 responses. • Experimental tests validated model forecasts with <5% error across all responses • Optimal 18% propanol blend at 2930 RPM improved Torque by 29% while cutting CO emissions by 37% • Framework supports SDG 7 and 13, offering a data-driven pathway for sustainable ICE optimization Alcohol-blended fuels in spark-ignition (SI) engines offer an efficient way to enhance engine efficiency and reduce emissions. This study integrates experimental engine testing with a three-level data-driven model; Gradient Boosting to perform multi-output predictions, and Response Surface Methodology (RSM) and NSGA-III to determine operating points that offer a balanced outcome between performance and emissions in 1-propanol-gasoline blends. The multi-channel tests of an SI engine of one cylinder (1700-3800 rpm; two load settings) produced eight simultaneous responses: torque, brake power, BSFC, BTE, CO, CO₂, HC, and NOₓ. The trained model was very accurate on most of the targets (e.g., BTE test R²: 0.95; BP test R²: 0.99). Both RSM and NSGA-III converged near 18% propanol and 2900–2950 rpm, with comparable Pareto-optimal performance. The 18% propanol mixture gave significant boosts as compared to pure gasoline at the same operating conditions: brake power was up by 31 %, torque by 29 %, CO and HC emissions were both reduced by 37 %, and BSFC had risen by 19 %. In conjunction with GB-RSM-NSGA-III methods, there exists a clear, repeatable approach to optimizing multiple objectives in alcohol blends for SI engines to promote clean-burning modes to fulfill SDG Goal 7 and SDG Goal 13.
Usman et al. (Sun,) studied this question.