Key points are not available for this paper at this time.
The buckling behavior of moderately thick and thick stiffened composite plates with different stiffener layouts is formulated based on the higher-order shear deformation theory. This investigation is performed under axial compression using the Finite Strip Method and experiment. The effects of dimensions, orientation, eccentricity, torsional stiffness, position and geometric configuration of stiffeners on the buckling load coefficient are achieved by employing the principle of minimum potential energy. Six grid-stiffened composite plate specimens with ortho-grid, angle-grid, and orthotropic-grid stiffeners are tested. The results of the presented method show good outcomes with those of experimental tests and the finite element ANSYS code.
Rafiee et al. (Sat,) studied this question.