Key points are not available for this paper at this time.
The Wood Innovation Research Lab was designed as a low energy-use building to facilitate the construction and testing of engineered wood products by the faculty and staff of the Master of Engineering in Integrated Wood Design Program at the University of Northern British Columbia in Prince George, BC, Canada. Constructed using a 533 mm thick-wall and 659 mm flat roof assembly, it received certification as Canada’s first industrial facility built to the International Passive House standard. Temperature and humidity sensors were installed in the north and south exterior wall assemblies to measure long-term hygrothermal performance. Data collected between 2018–2020 shows no record of long-term moisture accumulation within the exterior assemblies. Data collected during this time period was used to validate hygrothermal performance models for the building created using the WUFI® Plus software. Long-term performance models created using future climate data for five cities across Canada under two global warming scenarios shows favorable results, with an increase in average annual temperatures resulting in lower average relative humidity values at the interior face of the exterior sheathing board in the exterior wall assemblies.
Conroy et al. (Mon,) studied this question.