Coal is inherently soft, characterized by well-developed cleat systems, low strength, and significant anisotropy. Existing models that treat coal as a continuous medium or consider only a single plane of weakness fail to capture the synergistic effects of multiple weaknesses on wellbore instability. This study addresses this gap by integrating the strength criteria of weakness planes with wellbore stress theory. First, in situ stresses were transformed into the coordinate system of the weakness planes to derive the acting stress components. A strength criterion incorporating multiple structural planes—accounting for the coal matrix, bedding, face cleats, and butt cleats—was then applied to establish a coupled wellbore stability criterion. A corresponding collapse pressure program was developed using Visual Basic to analyze the effects of stress state, wellbore trajectory, and weakness orientation. The results show that the presence of multiple weakness planes significantly increases the sensitivity of wellbore stability to trajectory. Drilling parallel to the direction of minimum horizontal stress minimizes shear stress and collapse pressure, whereas drilling at high angles or parallel to the maximum horizontal stress activates the weakness planes, leading to a sharp increase in collapse pressure. The presence of these weaknesses results in a highly non-uniform and direction-dependent collapse pressure distribution, with their synergistic interactions further exacerbating the risk of localized failure.
Wen et al. (Thu,) studied this question.