Lanthanum silicate oxyapatite (LSO) is a promising oxide ion conductor for low-temperature-operating electrochemical devices owing to its high ionic conductivity along the c-axis. However, the fabrication of thin films with controlled crystallographic orientation remains challenging. In this study, polymer-assisted deposition (PAD), a solution-based technique offering precise microstructural and compositional control, was employed to fabricate c-axis-oriented LSO thin films. The fabrication of undoped LSO and the effects of Al and Mg incorporation on its microstructure, orientation, and ionic conductivity were systematically investigated. Undoped LSO thin films crystallised with a preferential c-axis orientation in the annealing temperature range of 800 and 1100 °C, and scanning transmission electron microscopy observations revealed a highly crystalline, void-free microstructure. Upon annealing at 1200 °C, the undoped LSO exhibited columnar grains with anisotropic in-plane grain growth, whereas Al- or Mg-doped LSO suppressed anisotropic in-plane grain growth and retained an out-of-plane c-axis orientation. The undoped LSO showed higher in-plane ionic conductivity than the doped thin films, consistent with their distinct crystallographic orientations. These results demonstrate that PAD provides a viable pathway for tailoring the microstructure and the composition of LSO thin films, thereby facilitating their applications in solid oxide electrochemical devices.
Hidaka et al. (Sun,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: