Key points are not available for this paper at this time.
To enhance the long stability of sulfur cathode for a high energy lithium–sulfur battery system, a sulfur–carbon sphere composite was prepared by encapsulating sulfur into micropores of carbon spheres by thermal treatment of a mixture of sublimed sulfur and carbon spheres. The elemental sulfur exists as a highly dispersed state inside the micropores of carbon spheres with a large surface area and a narrow pore distribution, based on the analyses of the X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET), thermogravimetry (TG) and local element line-scanning. It is demonstrated from galvanostatic discharge–charge process, cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) that the sulfur–carbon sphere composite has a large reversible capacity and an excellent high rate discharge capability as cathode materials. In particular, the sulfur–carbon sphere composite with 42 wt% sulfur presents a long electrochemical stability up to 500 cycles, based on the constrained electrochemical reaction inside the narrow micropores of carbon spheres due to strong adsorption. Therefore, the electrochemical reaction constrained inside the micropores proposed here would be the dominant factor for the enhanced long stability of the sulfur cathode. The knowledge acquired in this study is important not only for the design of efficient new electrode materials, but also for understanding the effect of the micropores on the electrochemical cycle stability.
Zhang et al. (Fri,) studied this question.