Key points are not available for this paper at this time.
Soft continuum manipulators have large workspace, dexterity and adaptability, but at the cost of complex design construction highlighted by concatenating several individually controlled serial segments. In this paper, we propose a new designarchitecture for a soft continuum manipulator composed of a parallel combination of pneumatic actuators. The BR2 manipulator, featured in this paper is asymmetric as it combines one soft bending (B) actuator and two soft rotating (R2) actuators, as opposed to state of the art symmetric architectures that adopt bending segments. Spatial deformation modes are achieved by combining curvature and torsion of the individual actuators. This paper formulates a forward analysis method based on Cosserat rod mechanics to predict the spatial deformation of the manipulator under the effect of external loads with an accuracy less than 9 % of the manipulator length. The model takes into account ‘the coupling effect’ inherent to the asymmetric combination, where pressurizing the rotating actuator attenuates the bendingcurvature and vice versa. Consequently, the paper studies the optimal design of the manipulator constituents that minimize the coupling, and thus maximize the workspace and dexterity. A detailed performance study of the BR2 manipulator on aswiveling base demonstrates a spatial workspace quantified by an axisymmetric area, and sufficient dexterity such that at least 87% of the workspace can be approached with two or more orientations. These are validated through obstacle avoidance, and a pick and place task. The manipulator is also capable ofwhole arm manipulation by spiraling along cylindrical objects of varying diameters. These performance attributes surpass any other single segment module and is a potential building block for constructing customized continuum manipulators.
Uppalapati et al. (Mon,) studied this question.