The nature and pattern of debris liberation by salt weathering: A laboratory study

Abstract A laboratory simulation of salt weathering was used to ascertain the effects of sodium sulphate and sodium carbonate under ‘Negev’ conditions using a single immersion technique. Three main points were addressed: what are the grain size and textural characteristics of the debris liberated from limestones and a sandstone, what do scanning electron microscope observations of the weathered samples tell us about the decay processes involved, and how does the rate of debris liberation change during the course of 100 cycles? The grain size characteristics of the liberated debris tended to be multimodal and were related to the original petrological characteristics of the rock. Large amounts of fines were produced which are believed to be analogous to the ‘rock flour’ of arid areas. Blistering was also observed. Scanning electron microscope analysis revealed differences in the style of attack for different rock types and salt treatments, and revealed the pattern of salt crystallization in pores and the nature of cracking. The rate of debris liberation tended to decline or remain constant through time. The reasons for this remain obscure, but it is evident that diurnal cycles of temperature and humidity change can cause continuing rock weathering long after the initial input of salt to the rock has taken place.