Key points are not available for this paper at this time.
The development of reliable methods for the estimation of crown architecture parameters is a key issue for the quantitative evaluation of tree crop adaptation to environment conditions and/or growing system. In the present work, we developed and tested the performance of a method based on low-cost unmanned aerial vehicle (UAV) imagery for the estimation of olive crown parameters (tree height and crown diameter) in the framework of olive tree breeding programs, both on discontinuous and continuous canopy cropping systems. The workflow involved the image acquisition with consumer-grade cameras on board a UAV and orthomosaic and digital surface model generation using structure-from-motion image reconstruction (without ground point information). Finally, geographical information system analyses and object-based classification were used for the calculation of tree parameters. Results showed a high agreement between remote sensing estimation and field measurements of crown parameters. This was observed both at the individual tree/hedgerow level (relative RMSE from 6% to 20%, depending on the particular case) and also when average values for different genotypes were considered for phenotyping purposes (relative RMSE from 3% to 16%), pointing out the interest and applicability of these data and techniques in the selection scheme of breeding programs.
Varela et al. (Wed,) studied this question.