Key points are not available for this paper at this time.
Industry 4.0 is initiated by the German government as a high level technology strategy in order to keep Germany in a global leading position in manufacturing, also intends to solve energy and aging issues in parallel. Germany has proposed the “Reference Architecture Model Industries 4.0” which is based on the regulations published by the International Electrotechnical Commission. The manifestation of Industry 4.0 can be achieved by the realization of digital factory. And it's emphasized on total integration with Cyber Physical System as its core technology, via Internet of Things to realize the operational environment of human machine interaction, and the utilization of Big Data for decision making. The research motivation of this thesis is to utilize Totally Integrated Automation Portal as a digital factory software development platform, to achieve the fundamental educational requirements of digital factory, and to understand Industry 4.0 concept. Methodology of this research is based on a set of experimental and training mechanism, the sequence of machine movements is controlled by a Programmable Logic Controller, and this PLC has to be complied with IEC61131 International Standard. Regarding communication technology also to be complied with IEC61158 and IEC62541 e.g. PROFINET and OPC UA protocol. And finally realizing the operational environment of human machine interaction via smart phone according to the outcome of this research, it has been shown that total integration concept can be realized by single production machine. By standardization of factory environment and increasing the level of operational environment of human machine interaction, productivity and quality of production could be significantly increased. PLC could be used to analyze intelligent platform and comply with the Industry 4.0 standard at the same time.
Chen et al. (Sun,) studied this question.