Most existing dental restorative materials exhibit limited bioactivity, insufficient acid resistance, and poor mechanical compatibility with natural tooth structures. This study involved an in vitro approach in which a biomimetic fluoride-modified functionally gradient dental restorative material was prepared from sol–gel-derived mesoporous silica through mineralization induced via SBF solution. They synthesized bioactive restorative materials by introducing silica into a simulated body fluid (SBF) for biomimetic mineralization and generating hydroxyapatite on the silica surface. XRD, FTIR, SEM, and EDS analyses confirmed the presence of hydroxyapatite and fluorapatite-like phases. The results showed statistically significant improvements (p < 0.05) in the mechanical properties. The surface hardness of the developed restorative system ranged from 214 HV for the prepared silica to 392 HV for the fluoride-modified specimens. Biomimetic mineralization and fluoride modification increased the shear bond strength to dentin substrates from 9.2 MPa to 21.4 MPa and the wear from 12.8 mg to 3.6 mg, respectively. Acid resistance evaluation also showed that the specimens with fluoride modification had the highest value of hardness retention (92.1%) after acid resistance due to the formation of chemically stable and dense apatite-rich layers on the surface. The functionally graded structure demonstrated a partial biomimetic resemblance to certain hierarchical and functional characteristics of natural dental tissues under in vitro conditions. In vitro studies on bioactivity, mechanical properties, and resistance to acidic environments of the synthesized restorative showed promising results for future dental restoration applications.
Al‐Kamal et al. (Mon,) studied this question.