This study explored the influence of high silver (Ag) loading (5–10 mol%) on the photocatalytic performance of zirconium (Zr) co-doped TiO2 (AZT) with a low Zr content. Although various Ag/Zr ratios have been reported, the effect of high Ag loading combined with low Zr content remains largely unrevealed, particularly in low-temperature synthesis where the role of Zr as a phase inhibitor is less critical. To address this gap, the AZT photocatalyst was fabricated via a solvothermal method combined with organic-free peroxy route. Characterization indicated Zr4+ incorporated into the TiO2 lattice, inducing structural distortions and promoting Ti3+ defect states. Simultaneously, silver existed as ternary Ag species, which functioned as visible light responsive co-catalysts that enhanced light absorption via Surface Plasmon Resonance (SPR) and facilitated efficient charge separation. Photocatalytic performance was evaluated through Methylene Blue (MB) decolorization under household LED lamp. The optimized 7% Ag loaded catalyst achieved 99.4% removal efficiency within 6 h, with a reaction rate ten times higher than the Zr-doped sample. This superior activity was attributed to a p-n heterojunction and the SPR effect, narrowing the optical band gap to 2.60 eV. Radical scavenger experiments confirmed that the process was primarily driven by photogenerated holes.
Soison et al. (Mon,) studied this question.