What question did this study set out to answer?

The aim is to analyze the theoretical aspects of tensile and compressive deformations in solids.

May 8, 2026Open Access

Deformation of Solids: Theoretical Analysis of Stretching and Compression Processes

Key Points

The aim is to analyze the theoretical aspects of tensile and compressive deformations in solids.
Analysis of internal stresses and relative deformations under external forces
Exploration of mechanical quantities like elastic and plastic deformation stages
Examination of principles such as Hooke's law, Young's modulus, and Poisson's ratio
Found significant correlations between deformation types and internal stresses under applied loads
Identified key mechanical quantities crucial for predicting material behavior under stress
Demonstrated the importance of these factors in ensuring reliable engineering systems

Abstract

This scientific article comprehensively analyzes the theoretical foundations of deformation phenomena in solids, in particular, tensile and compressive deformations. The study considers internal stresses, relative deformations, and their interrelationships under the influence of external forces. The main mechanical quantities such as elastic and plastic deformation stages, Hooke's law, Young's modulus, and Poisson's ratio are scientifically explained 2. The results show that they are of great importance in predicting the behavior of materials under load and ensuring the reliability of engineering systems 3.

Deformation of Solids: Theoretical Analysis of Stretching and Compression Processes

Key Points

Abstract

Cite This Study

Also Consider

Also Consider