Synapse

← Catalysis in Industry

Papers in Catalysis in Industry

Page 6 · newest first

  1. A new gas-phase method for formic acid production: Tests on a pilot plantCatalysis in Industry · 2014
  2. Porous carbon-silica composites and carbon materials from rice husk: Production technology, texture, and dispersityCatalysis in Industry · 2013
  3. Influence of the process parameters on temperature conditions and productivity of multitubular reactor for methanol to formaldehyde oxidationCatalysis in Industry · 2013
  4. Sibunit-based catalytic materials for the deep oxidation of organic ecotoxicants in aqueous solutions. III: Wet air oxidation of phenol over oxidized carbon and Rr/C catalystsCatalysis in Industry · 2013
  5. Catalytic oxidation of natural gas using flameless burners of a new designCatalysis in Industry · 2013
  6. Template synthesis of 3D-structured macroporous oxides and hierarchical zeolitesCatalysis in Industry · 2013
  7. MgAl2O4 spinel prepared by mechanochemical synthesis used as a support of multimetallic catalysts for paraffin dehydrogenationCatalysis in Industry · 2013
  8. Selective gas-phase oxidation of ethanol by molecular oxygen over oxide and gold-containing catalystsCatalysis in Industry · 2012
  9. Physicochemical study of polymer-stabilized platinum catalysts for enantioselective hydrogenation of ketonesCatalysis in Industry · 2012
  10. Processing of organochlorine waste components on bulk metal catalystsCatalysis in Industry · 2012
  11. Catalytic chemistry of preparation of hydrocarbon fuels from vegetable oils and fatsCatalysis in Industry · 2012
  12. Catalysts with noble metals based on super-cross-linked polystyrene for the hydrogenation of aromatic hydrocarbonsCatalysis in Industry · 2012
  13. Synthesis and catalytic properties of nanostructured Me/Mn0.5Ce0.5O2 in the oxidation of carbon monoxideCatalysis in Industry · 2012
  14. Perovskite-like catalysts for the catalytic flameless combustion of methaneCatalysis in Industry · 2012
  15. Single-site catalysts in the industrial production of polyethyleneCatalysis in Industry · 2012
  16. Selection of modifying additives for improving the steam tolerance of methane afterburning palladium catalystsCatalysis in Industry · 2011
  17. Catalysis in biomass processingCatalysis in Industry · 2011
  18. Catalysis in organochlorine synthesisCatalysis in Industry · 2011
  19. Analysis of the molecular structure of ethylene hexene-1 copolymers produced over highly active supported Ziegler-Natta catalystsCatalysis in Industry · 2011
  20. Supported Ziegler type catalysts for production of polyethylene (PE): Effect of the composition of the active component, the methods of its formation, and the use of modifying agents on catalytic activity and molecular structure of PE and copolymers of ethylene with α-olefinsCatalysis in Industry · 2011
  21. Oligomerization of α-octene catalyzed by zeolitesCatalysis in Industry · 2011
  22. Marine biological resources: An advanced raw material base for biofuelCatalysis in Industry · 2011
  23. Catalytic system for the synthesis of cyclic ketals from glycerol and lower carbonyl compounds (High-octane fuel bioadditives)Catalysis in Industry · 2011
  24. The catalytic conversion of bioethanol to hydrocarbon fuel: A review and studyCatalysis in Industry · 2010
  25. Catalytic processes and catalysts for production of elemental sulfur from sulfur-containing gasesCatalysis in Industry · 2010
  26. Sibunit-based catalytic materials for the deep oxidation of organic ecotoxicants in aqueous solution: I. Surface properties of the oxidized sibunit samplesCatalysis in Industry · 2010
  27. Kinetics of formaldehyde oxidation on a vanadia-titania catalystCatalysis in Industry · 2010
  28. Intensifying the oxidation of isopropylbenzeneCatalysis in Industry · 2010
  29. Modern catalysts of deep hydrotreatment in the production of low-sulfur diesel fuels at Russian oil refineries according to Euro-3 and Euro-4 standardsCatalysis in Industry · 2010
  30. Adsorption, catalysis, and reactions on the surfaces of metal nano-oxidesCatalysis in Industry · 2010
  31. Nanostructured metallopolymer catalysts in fine organic synthesisCatalysis in Industry · 2010
  32. Formation of nanosized bimetallic particles based on noble metalsCatalysis in Industry · 2010
  33. Metals in commercial catalysts: 1. Molybdenum and tungstenCatalysis in Industry · 2009
  34. Influence of the fillers in a catalytic system based on SIEL compoundCatalysis in Industry · 2009
  35. Development of catalysts based on pentasil-type zeolites for selective synthesis of lower olefins from methanol and dimethyl etherCatalysis in Industry · 2009
  36. Sol-gel synthesis of zeolite coatings and their application in catalytic microstructured reactorsCatalysis in Industry · 2009
  37. Synthesis methods for 2,6-naphthalenedicarboxylic acidCatalysis in Industry · 2009
  38. Exhaustive catalytic hydrodechlorinationCatalysis in Industry · 2009
  39. New catalysts for the environmentally friendly processing of chlorinated organicsCatalysis in Industry · 2009
  40. Photocatalysts for reagentless disinfection on the basis of titanium dioxide films modified by silver nanoparticlesCatalysis in Industry · 2009
  41. The biocatalytic obtainment of physiologically active compounds based on vegetative β-sitosterolCatalysis in Industry · 2009
  42. Nanostructured carbon materials for catalysis and adsorptionCatalysis in Industry · 2009
  43. Solid acid alkylation of isobutane by butenes: the path from the ascertainment of the reasons for fast deactivation to the technological execution of the processCatalysis in Industry · 2009
  44. The deactivation of polyoxide catalysts and their regenerationCatalysis in Industry · 2009