Kiln-fired clay bricks are energy-intensive and carbon-heavy. This study develops and validates kiln-free, pressure-free, and ambient-cured geopolymer (GPM) bricks made from uncalcined clay and Class F fly ash. A two-stage experimental program screened 33 mixes (12–16 M NaOH and 396 cubes tested at 14–90 days) and then scaled six optimized mixes to 90 full-size bricks for mechanical, durability, and microstructural evaluation. Bricks with an optimal mix of 20–30% clay and 70–80% fly ash achieved a compressive strength of up to 32.5 MPa, satisfying ASTM C62 (for severe weathering) requirements. Relative to fired clay units, GPM bricks delivered +61% average compressive strength (up to +91%), +56.5% average modulus of rupture (up to +103%), 6–29% lower water absorption, and 42–84% higher UPV while their strength losses after 28-day immersion in 5% H2SO4 or 3.5% NaCl were only ~3–5%. SEM confirmed a dense N-A-S-H gel matrix with reduced porosity. Eco-efficiency analysis showed ~95% lower embodied CO2 (0.26–0.31 vs. 5.5 kg eCO2 per brick) and ~35% lower cost per MPa of strength than fired clay bricks. The findings demonstrate a practical, low-carbon brick manufactured without mechanical pressing or heat curing, delivering verified performance and durability under ambient conditions.
Javed et al. (Mon,) studied this question.