Mechanical Performance of Concrete with Graphene-Oxide-Treated Recycled Coarse Ceramic Aggregates: Effects on Aggregate Water Absorption and Workability

The replacement of natural aggregates with recycled aggregates in concrete production has gained attention as a sustainable approach for valorizing construction and demolition waste (CDW). Although regulatory frameworks in this area remain underdeveloped, extensive research has demonstrated that acceptable mechanical and durability properties can be achieved. However, the elevated water absorption associated with recycled materials—mainly due to residual attached mortar and increased porosity—continues to pose a challenge. When used without prior treatment, these particles absorb part of the mixing water intended for cement hydration, potentially compromising both fresh and hardened concrete performance. This study explores the use of graphene oxide (GO) nanocoating as a surface modification strategy to mitigate water absorption. Absorption test were performed to evaluate the effectiveness of the treatment, followed by the preparation of multiple concrete mixes incorporating varying substitution rates of natural aggregate with untreated and GO-treated recycled material. The mixtures were assessed for workability and compressive strength. Results indicate that GO nanocoating substantially reduces water (up to 30%) uptake and improves the overall performance of concrete containing recycled constituents, increasing its compressive strength by up to 32%, highlighting its potential as a viable pretreatment for sustainable concrete production.