Observational analysis reveals phase composition and thermal stability in borosilicate glass-ceramics, suggesting enhanced performance for high-level liquid waste immobilization.
Glass‐ceramics are considered as promising candidate for high‐level liquid waste (HLW) immobilization. The effects of SrSO 4 content (2‒8 wt%, calculated as SO 3 ) on the phase composition, microstructure, and thermal stability of borosilicate glass were studied. The results show that the samples with 2‒4 wt% SrSO 4 possess an amorphous structure and no crystals are observed when melted at 1150°C for 3 h. A great quantity of SrSO 4 crystals (∼1 µm) appear and are uniformly distributed in the glass matrix of the sample with 6 wt% SrSO 4 (abbreviated as S6), and the grain size increases with further increasing SrSO 4 content. The SrSO 4 crystal is more thermally stable than Na 2 SO 4 crystal in borosilicate glass melts. The SO 3 retention in the glass‐ceramics has no obvious change when the temperatures are lower than 1050°C, and then decreases obviously with further increasing temperature. A white phase separation layer appears on the surface of glass‐ceramic, which is mainly composed of SrSO 4 along with a small amount of LiNaSO 4 phase at 1050°C‒1150°C. These results suggest that SrSO 4 ‐containing borosilicate glass‐ceramics have great potential for the immobilization of sulfur‐rich HLW.
No takes yet. Share an insight, caveat, or question.
An et al. (2025) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: