Optimizing Hole Cleaning in Horizontal Shale Wells: Integrated Simulation Modeling in Bakken Formation Through Insights from South Pars Gas Field

Horizontal wells in shale formations, such as those in the South Pars gas field (Iran) and the Bakken shale (Canada/USA), are essential for production from ultralow-permeability reservoirs but remain limited by poor hole cleaning, high torque, and unstable fluid transport. This study integrates real-time field data from South Pars with Drillbench simulations in the Bakken to develop practical strategies for improving drilling efficiency. A water-based mud system (9–10.2 ppg, 29–35 cP) supplemented with 2 wt.% sulphonated asphalt was applied to mitigate shale hydration, enhance cuttings transport, and preserve near-wellbore injectivity. Field implementation in South Pars demonstrated that adjusting drillstring rotation to 90 RPM and circulation rates to 1100 GPM reduced torque by ~70% (24 to 7 klbf·ft) and increased the rate of penetration (ROP) by ~25% (8 to 10 m/h) across a 230 m interval. Simulations in the Bakken confirmed these improvements, showing consistent torque and pressure trends, with cuttings transport efficiency above 95%. Inducing controlled synchronous whirl further improved sweep efficiency by ~15% and stabilized annular velocities at 0.7 m/s. Overall, these optimizations enhanced drilling efficiency by up to 25%, reduced operational risks, and created better well conditions for field development and EOR applications. The results provide clear, transferable guidelines for designing and drilling shale wells that balance immediate operational gains with long-term reservoir recovery.