Design and Parameter Optimization of Winding Device of Chain Network Residual Film Recycling Machine Based on High-Speed Camera Analysis

Aiming at the problems of low operating efficiency and the unclear mechanisms in the bundling process of existing residual film recycling machines, this paper designs a chain network-type residual film bundling device and analyzes the motion characteristics of the film bundling process using high-speed camera technology. A mechanical analysis of the bundling process was conducted, and a test rig for the chain network residual film bundling device was built. The bundling process was studied via a high-speed camera. Field tests were carried out with the density of the film bale as the evaluation indicator and the forward speed of the machine, the rotational speed of the active film-removing roller, and the rotational speed of the film-rolling support roller as influencing factors. A Box–Behnken experimental design was used to optimize the working parameters of the device. The results show that when the machine’s forward speed is 5.8 km/h, the active stripping roller rotates at 170 rpm, the roll support roller operates at 210 rpm, and the film bale density reaches 124.44 kg/m3, with a relative error of only 1.34 kg/m3 compared to the predicted value. This verifies the effectiveness of the device and demonstrates that it can meet the requirements of mechanized residual film recycling.