Key points are not available for this paper at this time.
Abstract Low-level moisture is an important ingredient for forecasting severe storms, especially over the Great Plains where severe storms often develop along the dryline. Although ground-based observation systems such as lidar or radiosondes on weather balloons provide accurate information on low-level moisture, data are provided at limited locations, and the low temporal resolution of radiosondes makes it difficult to track a rapidly developing dryline. Geostationary satellites provide high spatial and temporal observation, but the channels of current geostationary satellites are mostly sensitive to water vapor at mid to upper levels. However, the split window difference (SWD) between the “clean” window channel (10.3 μm) and the “dirty” window channel (12.3 μm) is commonly used for estimating low-level water vapor. However, this estimation is complicated by surface temperature contributions, dependence on the lapse rate, and nonlinear relationships between SWD and moisture. This study applies machine learning techniques to infer boundary layer precipitable water (BLPW) from Geostationary Operational Environmental Satellite (GOES) Advanced Baseline Imager (ABI) data. Since there are few observations that cover wide regions for training convolutional neural networks, especially for the atmosphere above the surface, High-Resolution Rapid Refresh (HRRR) model outputs are used as the truth for training. Statistical results show that using ABI channel 13, 14, and 15 brightness temperatures, skin temperature, solar zenith angle, and GOES total precipitable water product as additional inputs show the lowest MSE. Case study results show that the model developed in this study is good at capturing strong moisture gradients and depicting a dryline.
Lee et al. (Tue,) studied this question.