Utilizing an aspheric lens and compound ellipsoidal cavity for laser uniform illumination system

This is the authors' abstract. We don't add key points for this paper.

To achieve uniform laser illumination of an active imaging system with a small aperture diameter and large field angle, we have developed what we believe to be a novel structure for achieving uniform beam shaping that integrates a laser source, an aspheric lens, and a composite ellipsoidal cavity to enable active laser illumination. Through an aspheric lens, the fundamental mode Gaussian beam is transformed into double Gaussian and flat-top radiation at the target plane. The double Gaussian radiation is further reflected by a complex ellipsoidal cavity, where it is evenly distributed into equal radiation flux. This flux combines with the flat-top radiation, resulting in a uniform distribution at the target plane. The parameters of the complex ellipsoidal cavity are determined using an equalization algorithm. After combining the transmission for flat-top shaping by the aspheric lens and secondary reflection shaping by the composite ellipsoidal cavity, we achieved an aperture measuring 29.7 mm with an aperture angle of 84.0°, at a distance of 2 m from the target plane, with a diameter of 3.6 m, resulting in uniformity reaching 92.7%. RMS and M T / R determine the effectiveness of the compound ellipsoidal cavity design, depending on the maximum reflection angle and transmission angle. M T / R is inversely proportional to the maximum reflection angle, while RMS is directly proportional to the transmission angle. By setting the maximum reflection angle to 32.0° and the transmission angle to 8.0°, we were able to achieve a minimum root-mean-square focusing radius of 108.6 µm along with a minimum effective M T / R ratio of 1.07. The overlap degree between transmission and reflection directly impacts the target plane’s uniformity, adjusted through a defined adjustment factor. Optimizing this factor to 0.9 maximizes the uniformity of the target plane.