Simulation Analysis of Influence Laws of Sound Barrier Acoustic Performance When Using Ceramic as Sound-absorbing Materials

Abstract The excellent sound absorption performance of Sound Barrier which using Ceramic as Sound-absorbing Materials can be attributed to their corrosion resistance, lightweight nature, small particle size, and internal microporous structure. As a result, the application of new ceramic-based sound absorption materials in sound barriers is becoming increasingly widespread. To address the challenging issue of predicting the sound absorption and isolation performance of ceramic sound barriers and understanding the influencing factors on acoustic parameters, a simulation analysis method was employed for analyzing and studying various factors affecting the acoustic performance of these barriers. The calculation results demonstrate that increasing the thickness of both the sound absorption material and air layer behind exhibits similar effects on enhancing the sound absorption and isolation performance of ceramic acoustic barriers. Specifically, increasing either parameter leads to improved sound absorption performance by significantly increasing the sound absorption coefficient at 125Hz and 250Hz while decreasing it at 500Hz. However, in high-frequency bands above 1000Hz, structural parameters have minimal overall influence. Moreover, when keeping the thickness of ceramic sound absorption plates constant, every additional 20mm increase in air layer thickness behind results in a weighted increase in sound isolation by approximately 1dB; notable improvements are observed when this air layer thickness is below 1600Hz. When the thickness of the air layer behind is kept constant, an increase in the thickness of the sound absorption material by 10mm results in a 1dB increment in weighted sound isolation. However, when maintaining a total thickness of the sound barrier at 140mm, increasing the material’s thickness leads to a reduction in air layer thickness. Consequently, there is a slight enhancement in the sound absorption coefficient at frequencies of 125Hz and 250Hz while a minor decrease occurs at frequencies of 500Hz and 1000Hz. The impact on other frequency bands and overall sound absorption performance remains inconspicuous. Moreover, variations in weighted sound insulation quantity have minimal influence on sound insulation characteristics.