Evaluation of Cleaning Methods for Lithium Disilicate Ceramic Post Try-In Paste Application: An SEM Analysis

This in vitro study assessed the efficacy of three cleaning methods on lithium disilicate ceramic after the application of different try-in pastes through SEM analysis. Ten rectangular specimens of IPS e.max CAD were prepared using a diamond disc, crystallized, etched with 5% hydrofluoric acid, and subjected to three try-in pastes—Calibra ©, Variolink (V), RelyX Veneer®—and three cleaning techniques—air–water spray (RD), ultrasonic bath in distilled water for five minutes (ULT/W), and ultrasonic bath in distilled alcohol for five minutes (ULT/A). A control specimen was also included. After one-minute paste application and subsequent cleaning method application, SEM evaluation was conducted. The results indicate that RD was as effective as CTRL in removing remnants from R-RD, V-ULT/W and V-ULT/A samples, but ineffective for all Calibra paste-contaminated specimens. In conclusion, the optimal removal of try-in paste residues from lithium disilicate restorations is paste-dependent; however, ultrasonic baths with distilled water or alcohol proved effective for most pastes tested.