Key points are not available for this paper at this time.
In order to break through the top-down combustion mode brought by the traditional pillars, it is explored to explore the exploration of delay composition array construction in two-dimensional dimensions. In this study, B-CuO, B-Bi2O3, B-Fe2O3 sticks and combustion networks with good forming properties were prepared with the help of a micro-pen direct ink writing device by dispersing the above materials in DMF with boron and metal oxides as the main body of the charge and F2602 as the binder. The sticks were thermally ignited using a nichrome wire, and the flame propagation behaviors of the sticks with different formulations, spacings and heights were tracked with a high-speed camera, and a series of combustion networks were designed on the premise of not leaping into flames. Results show that the B-CuO stick has the fastest ignition speed level (19.71–29.02 mm ·s−1) at equivalence ratios of 1.0–4.0, followed by B-Bi2O3 (5.99–16.01 mm ·s−1) and B-Fe2O3 is the slowest (1.91–4.94 mm ·s−1). The sticks burned best at an equivalence ratio of 1.0–1.5. A variety of combustion networks were constructed on 50 × 50 mm glass slides by selecting B-CuO, B-Bi2O3, and B-Fe2O3 at the equivalence ratios of 1.0, 1.5, and 1.5, respectively, among which B-CuO had the shortest combustion time (5.17 s), the shortest total combustion network length (252 mm), and 400 mm network could be realized for B-Bi2O3. Construction and 19.85 s, and B-Fe2O3 can realize 608 mm network length and 130.7 s combustion time. Through these studies, the two-dimensional combustion network construction of boron-metal oxides was realized, which provides a new idea for the delay action in small size.
Song et al. (Fri,) studied this question.