Halide Perovskite and few-layer silicon based Surface plasmon resonance sensor for the detection of chemical and biochemical sensing

This paper examines the combined effect of perovskite/silicon (Si) material on the performance of a surface plasmon resonance (SPR) sensor using the Kretschmann structure. The proposed sensor incorporates the BAF10/Cu/perovskite materials/Si/sensing medium (SM) layers. This paper incorporates the optimized parameters into the proposed sensor by comparing the results without perovskite material and existing work. The proposed modified Kretschmann structure consists of perovskite material such as CsPbI3, FASnI3, KSnI3, and CsSnI 3 , with few Si layers. All the performance parameters are calculated at 633 nm wavelength. The sensitivity (S), full width at half maximum (FWHM), detection accuracy (DA), and figure of merit (FoM) of 348.75°/RIU, 3.22°, 0.31/° and 108.11/RIU using perovskite material of KSnI 3 , are measured, respectively by the proposed sensor. The perovskite material of KSnI 3 shows the best performance parameter among CsPbF 3 , FASnF 3 , and CSSnF 3 . These results should greatly impact the biosensing application, especially for chemical and biochemical.