Facile Polymer of Intrinsic Microporosity-Modified Separator with Quite-Low Loading for Enhanced-Performance Lithium Metal Batteries

Lithium metal batteries (LMBs) using Li metals as anodes are conspicuous for high-energy-density energy-storage devices. However, the nonuniform deposition of Li+ ions leading to uncontrolled Li dendrite growth, which adversely affects electrochemical performance and safety, has impeded the practical application of lithium metal batteries (LMBs). Herein, PIM-1, a type of polymer of intrinsic microporosity (PIM), was utilized for surface engineering of conventional polyolefin separators. This process resulted in the formation of a continuous and homogeneous coating across the separator, facilitating uniform Li+ ion flux and deposition, and consequently reducing dendrite formation. Notably, the loading mass was quite low (0.6 g/m2) through the convenient dipping method. The intrinsic micropores and polar groups (cyano and ether groups) of PIM-1 greatly improved the electrolyte wettability and ionic conductivity of commercial polypropylene (PP) separators. And the PIM-1 coating guided Li+ flux to achieve uniform Li deposition. Moreover, the polar groups (cyano and ether groups) of PIM-1 are beneficial to the desolvation of Li+-solvates. As a result, the synergetic effect of uniform Li+ flux, desolvation, and enhanced mechanical strength of separators brings about considerable improvement in cycle life, suppression of Li dendrite, and Coulombic efficiency for LMBs. As this surface engineering is simple, relatively low-cost, and effective, this work provides fresh insights into separators for LMBs.