Key points are not available for this paper at this time.
Laser powder bed fusion (LPBF) Invar 36 alloy has attracted plenty of attention in cryogenic components or precision instruments due to its low coefficient of thermal expansion in a wide range of temperature. However, the LPBF Invar 36 has a significant anisotropic mechanical property due to the unique columnar grain morphology and pore feature. In this study, the influence of scanning speed on the anisotropic tensile properties were investigated, and the melt pool dynamics were analyzed by the numerical simulation. In this respect, tensile tests of specimens parallel and perpendicular to the building direction with a scanning speed from 200 to 1400 mm/s of LPBF Invar 36 alloy were conducted, and the microstructural influential factors on the anisotropic tensile properties were analyzed. Results show that as the volumetric energy density (VED) increases, the inhomogeneity of grain morphology decreases, while the pore feature changes from the lack-of-fusion (LOF) pore perpendicular to the building direction to the bubble-shaped spherical pore, which is resulted from the collapse of the key-holes. In this case, the grain orientation and size, as well as the dislocation density in the vicinity of pores are influenced by the pore morphology due to different thermal history. On the whole, the combined morphology of dislocation and stress concentration affected by the pore morphology are the main reason of the increased level of anisotropy in tensile properties.
Yang et al. (Mon,) studied this question.