In this work, dielectric ultracapacitors were designed and fabricated using the combination of the phase boundary and nanograin strategies. Such ultracapacitors are based on submicron-thick Ba(Zr0.2Ti0.8)O₃ ferroelectric films sputter-deposited on Si at 500 ℃. With a composition near a PPB, a compressive strain and a high nucleation rate due to the lowered deposition temperature, these films exhibit a columnar nanograined microstructure with gradient phases along the growth direction. Such a micro-structure presents three-dimensional polarization inhomogeneities on a nanoscale, thereby significantly delays the saturation of the overall electric polarization. Consequently, a pseudo-linear, ultra-slim polarization-electric field hysteresis loop was obtained, featuring a high maximum applicable electric field (~5.7 MV/cm), a low remnant polarization (~5.2 μC/cm²) and a high maximum polarization (~92.1 μC/cm²). Such a P-E loop corresponds to a high recyclable energy density (Wrec~208 J/cm³) and charge-discharge efficiency (~88%). An in-depth electron microscopy study revealed that the gradient ferroelectric phases consist of tetragonal (T) and rhombohedral (R) polymorphs along the growth direction of the film. The T-rich phase is abundant near the bottom of the film and gradually transformed into the R-rich one near the surface. These films also exhibited a high Curie temperature of ~460 ℃ and a stable capacitive energy storage up to 200 ℃. These results suggest a feasible pathway for design and fabrication of high-performance dielectric film capacitors.
No takes yet. Share an insight, caveat, or question.
Song et al. (2024) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: