Key points are not available for this paper at this time.
Acoustic Emission (AE) monitoring is considered one of the popular non-destructive testing (NDT) methodologies that have been used to predict and identify the location of damage in critical civil infrastructure. In this paper, an improved AE crack localization method is proposed by integrating the empirical mode decomposition (EMD)-based signal decomposition method with a source localization model. Unlike the conventional AE method, the proposed method is free of the use of bulk AE parameters such as counts, rise time, signal strength, and energy. First, EMD is used to minimize the presence of noise in the recorded AE waveforms and extract the key AE components. Then, key AE events are located using the source localization model to localize the crack in concrete structures. The performance of the proposed method is validated experimentally on small and large-scale concrete beams, where the damage is induced using progressive static load testing. In particular, the large-scale beams are designed for flexural and shear mode failure to evaluate the performance of the proposed method under various types of damage. Finally, the results of the proposed method are compared with the traditional method that uses raw AE waveforms and the method that uses bandpass-filtered AE waveforms. The results show higher crack location accuracy of the proposed method than the other methods, which makes it a suitable approach as a crack localization technology.
Barbosh et al. (Tue,) studied this question.