Key points are not available for this paper at this time.
Abstract The reliable anchorage and long‐term durability of high‐performance fiber reinforced polymer composites were the decisive factors for engineering applications owing to the anisotropy of materials and the complexity of service environment. In this paper, an innovative glass fiber reinforced polypropylene (GFRPP) self‐anchor plate cable was developed to utilize the high toughness/durability of thermoplastic resin and self‐anchor load‐bearing system. The effects of different reinforcement methods and cable arc angles (10°, 20°, and 30°) on mechanical properties of plate cable were investigated. Water absorption behavior and mechanical properties immersed in alkali solution were tested to evaluate its long‐term service behavior. The thermogravimetric and surface morphology analysis were conducted to reveal the performance evolution mechanism. The results showed through the combination of secondary melting, carbon fiber winding confinement and epoxy reinforcements, the splitting failure of transition zone and interlaminar cracking failure of straight zone for plate cable were effectively avoided. The tensile strength retention of plate cable for arc angles of 10°, 20° and 30° were 45.6%, 41.3%, and 34.0% of GFRPP plate, respectively. Larger arc angle increased the curvature of arc‐straight transition zone and stress concentration near the straight section, leading to interlaminar splitting failure of plate cable at weak transition zone. The tensile strength of plate cable with the immersion time deteriorated obviously until the lowest retention of 29.7%. The degradation mechanism was mainly due to the etching of glass fibers in alkali solution and the formation of pores and internal defects, including fiber/resin interface debonding and resin swelling. The research results were of significance for solving the anchoring problems and promoting the long‐term service reliability in bridge applications. Highlights The mold can realize reliable molding of glass fiber reinforced polypropylene cables after the reinforcements. The tensile strength retention of plate cable was up to 34.0%–45.6% of plate. Larger arc angle increased the stress concentration near the straight section. Non‐polar polypropylene plate was proved to have better hydrophobic performance. The degradation mechanism of plate cable in alkali solution was revealed.
Zhang et al. (Wed,) studied this question.