Multiple heating loads participate in the system power regulation control strategy

With the addition of a high proportion of new energy and power electronic equipment, the power system has shown characteristics such as low inertia and significant energy output fluctuation, which has brought great challenges to power/frequency regulation and control of the power system. Therefore, this article uses the inertia characteristics of heat energy on the load side and exerts reasonable start-stop control to play a positive and beneficial role in the power regulation of the power system. Firstly, the room temperature variation process was transformed into a lumped parameter equivalent model. A lumped parameter heat transfer model of a single typical load was built in Simulink, and its dynamic characteristics were analyzed by symbolic calculation. Based on this, a time-domain simulation was carried out to explore the influence of the law of system parameters and external input on the change of system state quantity. Based on time domain simulation, the behavior of the heating load is analyzed. Then, the effects of typical and multiple loads on system power regulation at different outdoor temperatures are studied. It is found that when the average outdoor temperature decreases, the sustainable time of system power upturn will increase, and the sustainable time of downturn will decrease. The power curve of multiple loads simultaneously is more stable, and the adjustment ability is stronger. The reasonable and flexible control method of load switch setting, namely the coherent characteristic load power regulation strategy, realizes the sustainable power optimization of the load to the system in the specified period.