The SPARC cryogenic system

The SPARC project at Commonwealth Fusion Systems (CFS) is a tokamak system designed to demonstrate commercially relevant fusion energy and achieve net fusion power output during the first operating campaign, with eventual fusion pulse energies exceeding 1 GJ. The SPARC tokamak includes eight magnet systems, three that use high-temperature superconducting (HTS) tapes. The SPARC cryogenic system (CRYO) consists of three supercritical helium cryogenic loops at nominal temperatures of 8 K, 15 K, and 80 K. CRYO 8 K and 15 K loops cool the HTS magnets to maintain thermal stability and prevent quench, while magnets cooled to 80 K are normally conductive. CRYO provides cold helium using a hybrid system that includes a Brayton-cycle-based cryoplant supporting all CRYO temperature loops, and a fixed volume 8 K blowdown system to remove heat and maintain temperature stability of the toroidal field (TF) magnets during and immediately following fusion pulses. CRYO 4.5 K equivalent peak cooling power is 17 kW for the cryoplant and 2.9 MW for the blowdown system during a 10-second fusion pulse. Primary cryoplant mechanical equipment includes screw compressors, turbo-expanders, heat exchangers, and circulation pumps, while the blowdown system consists of a series of warm and cold helium storage tanks operating at independent temperatures and pressures, with make-up compressors to reset the blowdown system between pulses. CRYO also includes a distribution valve box and multiple vacuum-jacketed (VJ) process lines ranging in nominal diameter from 20 to 600 mm. This paper investigates the various sub-elements which in combination represent SPARC CRYO, and attempts to address some of the technical challenges identified by the team.