Manually operated microtube automatic capper/decapper system for clinical laboratory and biological laboratory personnel

Abstract Polymerase chain reaction (PCR) is an effective method for diagnosing infectious diseases and has been the primary method throughout the novel coronavirus disease (COVID-19) pandemic. PCR tests (from specimen collection to result acquisition) involve sample pretreatment, nucleic acid extraction, and PCR procedure. Automating the pretreatment process is crucial to mitigate the risk of infection for workers and to reduce the likelihood of sample contamination-triggered misdiagnosis, particularly when handling centrifuge tubes, cryopreservation tubes, and microtubes. Robotic systems have been engineered to automate cell culture and PCR-based diagnosis , predominantly designed for use with screw-capped containers. However, this leaves a notable gap in automation solutions for microtubes equipped with press-type caps. To address this gap, we developed a versatile microtube capper/decapper system. On the other hand, many tasks of manual operation using microtubes, which are routinely conducted in clinical tests and biological experiments, were performed. Despite the risks of contamination and infection derived from the manual handling of microtube caps, which can compromise diagnosis/experiment accuracy and worker safety, devices for manually opening and closing microtube caps without direct contact remain lacking. Therefore, leveraging the technology from the developed versatile microtube capper/decapper system for laboratory automation, we created a manually operated microtube equipped with an automatic capper/decapper system tailored for personnel in clinical and biological laboratories. In this study, we first examined the required specifications and prerequisites for a manual microtube capper/decapper and clarified the operating methods, operating procedures, operation environment, device size, accompanying functions, etc. Based on the required specifications and preconditions, we proceeded with the mechanical and control design of the conceptual model, manufactured a prototype, and confirmed its basic functions and performance. The compliant to the required specifications and preconditions and the usefulness of the proposed manual microtube capper/decapper were validated through various experiments and demonstrations. Because microtubes are used in various clinical tests and biological experiments, we believe that the proposed system can markedly reduce the workload for personnel across numerous clinical and biological laboratories.