Key points are not available for this paper at this time.
In secondary Al-Si based alloys, microalloying with Mn and Cr can modify harmful platelet-type AlxFeySiz intermetallic phases to less detrimental α-Alx(Fe, Mn, Cr)ySiz phase (script or polygonal morphologies). However, the α-Alx(Fe, Mn, Cr)ySiz phase morphology, phase composition and the addition of Fe-correcting elements can be influenced by solidification conditions. Therefore, this research is aimed to highlight the morphological evolution and mechanisms of α-Alx(Fe, Mn, Cr)ySiz phase in a Cr added Al-9%Si-1%Fe-0.2%Cr (all weight percentage thereafter, unless otherwise stated) alloy with varying Mn concentrations (0.25%, 0.5%, and 0.8%). Microstructure evolution of Fe intermetallic phases is investigated under different casting conditions using a wedge-shaped die, Cu-chill block and melt quenching experiments. Thermodynamic simulations have been performed using CALculation of PHAse Diagrams (CALPHAD) method and compared with the experimental results for phase composition and formation temperatures of α-Alx(Fe, Mn, Cr)ySiz phase. The results indicated that for 0.25Mn-0.2Cr addition to Al-9Si-1Fe alloy, compact morphology containing polygonal phases are formed in Cu-chill casting, while the wedge castings predominantly show a mixed structure with platelets and script type morphologies. Tensile tests revealed a higher elongation value of 6.6% for mixed structure with platelet and script phases, which is decreased to 4.2% for polygonal phases in Al-9Si-1Fe-0.2Cr-0.25Mn alloy. This study highlights the importance of solidification conditions on morphologies of Fe-intermetallic phases and the mechanical properties by comparing selected literature relevant to high pressure die-casting process.
Balasubramani et al. (Tue,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: