Key points are not available for this paper at this time.
Abstract The practical application of aqueous Zn‐metal anodes (AZMAs) is mainly impeded by the short cycling life and unsatisfactory reversibility springing from the notorious Zn dendrite growth and detrimental water‐induced parasitic reactions at anode‐electrolyte interface. To tackle these challenges, a multifunctional interface of Sn‐modified Ti 3 C 2 Cl 2 MXene (denoted as Sn‐MXene) with high zincophilic and hydrophobic properties is rationally designed via a 1‐step strategy with a novel molten salt etching to achieve dendrite‐free Zn deposition. Experimental results and theoretical calculations reveal that the Sn nanoparticles can induce a strongly zincophilic surface with high Zn 2+ adsorption, and the Ti 3 C 2 Cl 2 MXene significantly decreases the surface energy of the Zn (002) plane, guiding the zinc‐preferred orientation along the (002) plane in the electroplating growth process. Moreover, the hydrophobic properties of ‐Cl terminations of the protective interface for the Zn anode can regulate Zn‐ion solvation structure to mitigate H 2 O‐decomposition‐induced side reactions, and guarantee a steady stream of Zn 2+ flux. Encouragingly, benefiting from the Sn‐MXene layer, a side reaction‐free and dendrite‐free Zn anode with an excellent lifespan is achieved, which is further applied as an anode for full battery (Sn‐MXene‐Zn// α ‐MnO 2 ) with a long‐term span over 800 cycles under 1 A g –1 with a capacity retention of 96%.
Wang et al. (Sun,) studied this question.