Key points are not available for this paper at this time.
Current source inverters (CSIs) have been widely used for renewable energy sources integration with the utility grid. However, traditional CSIs provide only voltage-boost power conversion, which can be considered a limitation for grid-interfacing applications when consistent tracking of a widely varying input voltage is necessary. Hence, an additional front-end converter is usually utilized in an attempt to step down the input source voltage. Nevertheless, adding the dc-dc bucking stage would reduce the system reliability and its overall efficiency, increase the converter cost, and complicate the control scheme. In order to address the aforementioned shortcomings, this paper proposes a novel three-phase single-stage inverter, suitable for low-power applications, called split-source current-type inverter (SSCTI). The proposed converter can achieve high current boosting capability with lower component count and high-quality output current in comparison with other single-stage topologies. In addition, it utilizes the conventional modulation scheme of the CSI, while maintaining low current stresses on the inverter switches. Comprehensive analysis, modelling, and closed-loop control scheme of the proposed converter are developed. Also, a comparison between the proposed topology and several single-stage topologies is carried out. Moreover, an experimental prototype is built to validate the proposed converter analysis under steady-state operation and different transient scenarios.
Abdel-Moneim et al. (Fri,) studied this question.