Key points are not available for this paper at this time.
Growing demand for renewable and sustainable energy sources has prompted research into bioethanol production as a viable alternative to hydrocarbon fuel for automobile engines. Based on their high carbohydrate content, Chlorella vulgaris microalgae were chosen for this study as a feasible biomass for bioethanol synthesis. After conducting microwave-based acid hydrolysis with varying acid concentrations of sulfuric acid (H2SO4) for 1–15 min, this study found that 3% H2SO4 for 5 min yielded the highest yield of reducing sugar (6.77 g/L). In this work, the RSM approach of central composite design (CCD) was utilized for modeling and optimization of ethanol fermentation and the MATLAB Simulink approach was employed for the simulation of ethanol fermentation. This study compared the effects of using Saccharomyces cerevisiae yeast for fermentation at different fermentation times (12 to 48 h), temperatures (28 to 32°C), and size of inoculum (0.5–1.5 g/L). Based on the actual and predicted results, the best conditions for fermentation were 36 h of time, 30°C of temperature, and 1.5 g/L of inoculum size. This gave the maximum ethanol concentration of 3.31 g/L. Furthermore, the RSM method provides minimum error and maximum R2 value results for ethanol production compared to MATLAB simulation prediction (MSP). In addition, residue biomass from biofuel production is evaluated for its suitability for a further form of biofuel production. This research explores the opportunities for zero-waste biomass utilization in the development of biofuels.
Shenbagamuthuraman et al. (Wed,) studied this question.