Surface Displacements Monitoring in Cyprus via InSAR and Field Investigation: The Case Studies of Pyrgos-Parekklisia and Pedoulas Villages

The island of Cyprus is characterised by a complex geological environment as it overlies a boundary zone of three tectonic plates, leading to high seismicity and intensive tectonism. It consists highly of Neogene marls, exhibiting serious geotechnical problems due to their high content of clay minerals. Along with strong, destructive earthquakes, various geohazards have been identified in Cyprus, including landslides, swelling/shrinking phenomena and land subsidence etc. Pedoulas is a village in Cyprus experiencing ground deformation due to landslide phenomena. Conversely, Pyrgos and Parekklisia villages in Limassol, Cyprus are experiencing a long-term swelling/shrinking phenomenon. To further investigate this surface deformation, a time-series InSAR analysis of Sentinel-1 SLC images of ascending satellite passes was performed, with a parallelised version of PSI (Persistent Scatterers Interferometry), along with field investigation, for the time period of 2016 to 2021. Negative vertical displacements with maximum rates of −10 mm/y, were identified in Pedoulas village, while positive vertical displacements with a maximum rate of 10 mm/y, dominated in Pyrgos and Parekklisia villages. The analysis of precipitation data from 2017 to 2021, presented a correlation between annual fluctuations in precipitation in the affected areas and changes in the InSAR time-series deformation trends. In Pedoulas village, landslide movements sped up during spring and summer, when the infiltration of waste water in the ground intensified due to the increase in the tourist population. In Pyrgos-Parekklisia villages, higher positive deformation rates were identified in winter months, while during summer, when the formations dried out, uplifting phenomena stopped evolving. The integration of InSAR displacements with field investigation provided validation of the observed ground failures and added valuable insights into the driving mechanisms of the deformation phenomena. Finally, the assessment of the impact of the triggering factor in the evolution of the deformation phenomena, can serve as a valuable tool for risk mitigation.