High-Temperature Sintered 3D-Printed Alumina as Mechanically Robust Supports for MOF Catalysis

Q: What type of study is this?

This is a Experimental Study study.

Flora Schoefbeck; Tanja Eder; Wenyi Zeng; Dominik Brouczek; Martin Schwentenwein; Youven Benseghir; Michael R. Reithofer; Jia Min Chin

doi:10.1039/d5ma01028d

January 1, 2025Materials AdvancesOpen Access

High-Temperature Sintered 3D-Printed Alumina as Mechanically Robust Supports for MOF Catalysis

View Full Paper

Ask AI

Bookmark

Share

Key Points

The functionalization process enhances the stability of MOF-catalytic composites.
Dense α-alumina was sintered at 1450–1650 °C to ensure robustness in catalytic applications.
High-temperature sintering enables the direct functionalization of ceramics with MOF materials.
These composites show promise for improved performance in catalytic reactions.

Implication

Demonstration of high-temperature sintered alumina functionalized with ZIF-8 in MOF catalysis, suggesting improved composite stability.

Abstract

We demonstrate the functionalization of high-temperature sintered, 3D-printed α-alumina ceramics with ZIF-8 and MOF-808 to create robust MOF–ceramic composites. Dense α-alumina sintered at 1450–1650 °C can be directly functionalized despite...

Discussion

No takes yet. Share an insight, caveat, or question.

Cite This Study

Schoefbeck et al. (2025) studied this question.

synapsesocial.com/papers/68eb8fe250220ac955d94c15 https://doi.org/10.1039/d5ma01028d

View Full Paper

Ask AI

Bookmark

Share

High-Temperature Sintered 3D-Printed Alumina as Mechanically Robust Supports for MOF Catalysis

Key Points

Implication

Abstract

Discussion

Cite This Study

High-Temperature Sintered 3D-Printed Alumina as Mechanically Robust Supports for MOF Catalysis

Key Points

Implication

Abstract

Discussion

Cite This Study

Keep reading

Keep reading