A Novel Poly-Potassium Salt Osmotic Technique for High-Suction Water Retention in Compacted Kaolin

Accurate suction control underpins thermo-hydro-mechanical (THM) characterization of unsaturated soils, yet conventional polyethylene-glycol (PEG) osmotic methods suffer from membrane degradation, polymer intrusion, and marked temperature sensitivity. This study evaluates a potassium-neutralized poly (acrylamide-co-acrylic acid) hydrogel (PP) as a high-suction osmotic medium for water-retention testing of compacted kaolin using a sealed cell with a grade-42 filter paper separator (no semi-permeable membrane). The water-activity–suction relation of PP was calibrated with a chilled-mirror hygrometer (WP4C) over the high-suction domain, and temperature effects were assessed between 20–30 °C. The PP imposed stable target suctions across the practical engineering range, with cross-validation to WP4C of R2 ≈ 0.985 and RMSE ≈ 0.09 MPa, and exhibited modest thermal sensitivity (~2–3% per 10 °C). Mass–time records showed a two-regime equilibration (rapid first-day moisture loss then slowing to asymptote), with time to 95% equilibrium t95 ≈ 3–7 days depending on suction, and equilibrium within ~2 weeks under a normalized mass change, 1m∆m∆t<0.1%24h criterion. The resulting kaolin water-retention curves are smooth soil moisture factor (SMF) reproducible, and exhibited minor wetting–drying hysteresis (~20–25% gap at matched suctions). Collectively, the results indicate that PP provides a practical, membrane-free (in the semi-permeable sense) and accurate means to control high-range suction for unsaturated soil testing, showing only modest suction variations within the tested 20–30 °C range, while mitigating long-standing PEG limitations and simplifying laboratory workflows.